1994 Johnson/Evinrude "ER" 60 thru 70 outboards Service Manual, Page 187Get this manual
1sl 7Thread the adapter from OMC Steering Tube Service Kit, PIN 434523, onto the port end of the tilt tubeThread OMC Slide Hammer, PIN 432128, into the adapter until at least in(51 mm) of thread are engagedPull the tilt tube from the stern brackets I!] 8Remove the two tilt tube washers9Remove the anoder:J1l 10Remove the swivel bracketInspect and, if necessary, replace the tilt tube bushingsf121 11Remove the trim sender unit from the port stern bracket and pull its wires through the braided tube