1994 Johnson/Evinrude "ER" 60 thru 70 outboards Service Manual, Page 183Get this manual
9Remove the thrust rod from the stern brackets r:J8l10
Remove the stern bracket to spacer screwsport and starboard
f.i7111Remove the shock absorber pin set screw Remove the
TTL Models
shock absorber pinRemove the shock absorber from the spacer
1Remove one of the tilt tube nutsPull the tilt tube out of the swivel bracket assemblyIf necessary, use OMC Steering Tube Service Kit, PIN 434523Lift the swivel bracket from the stern brackets
] 2Remove the thrust rod from the stern bracketsr:J8l3Remove the stern bracket to spacer screwsport and starboardCOB2122
Assembly
Manual Tilt ModelsPlace the bushings in the shock absorber basePosition the shock absorber in the spacerInstall the pin through the spacer and shock absorberInstall the pin set screw in the spacer and tighten to torque of 24-26 inIbs(3-4 Nm)