1994 Johnson/Evinrude "ER" 60 thru 70 outboards Service Manual, Page 164Get this manual
10 DR2662
1101 11Install the lower pan support screws and washers on the port and starboard bracketsTorque the screws to 60-84 inIbs(7-9 Nm)
r:t1l 12Install the forward lower coverTighten the screws
securelyf121 13Install the rear lower coverLoosely install the four front
f131 14Install the two rear screws Tighten all six screws
securely
] 15Secure the powerhead ground lead to the powerhead1141 16Align the shift rod and shift leverInstall the shoulder screw and torque to 60-84 inIbs(7-9 Nm)r:;-;;l 17modelsAlign the shift lever and shift rodPull the shift lever away from the powerhead and install retainer clipThe clip must compress the flat washer and wave washer
i aligned properly and securely installed