1994 Johnson/Evinrude "ER" 60 thru 70 outboards Service Manual, Page 146Get this manual
Powerhead ServicingAll Models Removal
i twist and remove all spark plug leadsOn electric start
models, disconnect the battery cables at the battery1Rope Start modelsremove the starter assemblyRefer to Section 7
To avoid accidental starting of the engine while servicing,
[!] 2Remove three screws and remove the starter ratchetf213Remove the starter lockout cable clamp and disconnect the cable from the shift leverf214Tiller modelsremove the throttle cable pivot and the cable bracket
[3J 5Disconnect the shift lever 6Remove the stop switch ground lead and remove the stop switch lead from cavity liE" of the stator 5-pin Amphenol connectorUse OMC Pin Remover, PIN 322698, and isopropyl alcoholfJl7, Cut the tie straps and remove the hoses from the manual primer assem"bly,