1994 Johnson/Evinrude "ER" 60 thru 70 outboards Service Manual, Page 104Get this manual
Installation 1Install the flywheel key centerline of crankshaft with its outer edge parallel to
2Clean the crankshaft and flywheel tapers with OMC Cleaning Solvent and let dryThes'e surfaces must be clean and dry to allow proper locking of the tapersAlign the flywheel keyway and install flywheelCoat the threads of the flywheel nut with OMC Gasket Sealing CompoundInstall the nut and torque to the correct valueSee chart belowFlywheel Nut Torque Chart