1994 Johnson/Evinrude "ER" 60 thru 70 outboards Service Manual, Page 74Get this manual
Disassembly
All screws addressed in this procedure are No15 Torx
ill when removing screws and releasing that pressure
'" The air motor cover is under spring pressureUse caution
[';l With No15 Torx screwdriver, remove the Torx screws LJ holding the air motor coverTo control the spring pressure, place pump on your bench with the air motor cover facing upwardHold down on cover while removing screws
Set cover, screws, O-ring, and two springs aside
Remove the Torx screws attaching the inlet housing to the intermediate housing and separate these partsAs you lift the inlet housing, the oil piston will be drawn out of the oil pump