1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 292Get this manual
r::;;;l 20Using OMCRod Holder, PIN 983213, clamp rod tightly in viseLubricate end cap and slide it on the rod Install wear plate on rod end and torque to 84-108 inIbs(9,5-12 Nm)Assembly
Lubricate five new pump manifold a-rings and place in cylinder bodyscrews, and torque to 60-84 inIbs(7-9 Nm)
f21 2Attach pump manifold assembly to cylinder body with three
t=J Allen-head
3Lubricate and install the manual release valveThread the valve all the way into the manifold and torque to 45-55 inIbs(5-6 Nm)Install the retaining ring with the sharp edge of the ring facing out4Lubricate new motor a-ring Place it on the motor and attach the motor to the pump manifold assembly with four Pozidriv screwsTorque the screws to 35-52 inIbs(4-6 Nm)Secure wire shield to pump manifold assembly1sl 5Lubricate new reservoir a-ring and place it in the cylinder body6Reinstall reservoir filter and plug