1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 285Get this manual
rJl f8l 5 Remove the four screws that retain the lower motor coversRemove the starboard cover
19l 6Disconnect the three bullet connectors, and remove the port
cover7Raise the unit and lock it in place with the mooring bracketr,()l 8Disconnect the bullet connector and two-pin connector for the trim senderPull the wires with braided tube through the stern bracket'111 9Remove the ground wire from motor retaining screw using No.3 Pozi-Driv tool10Remove external snap rings from the upper pin