1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 256Get this manual
RectifierRegulator Servicing Removal 1Remove the battery cables from the battery2Remove the rectifierregulator coverr:jl 3Separate the stator yellow and yellowgray lead connectorDisconnect the engine wiring harness purple and gray leads' bullet connectorsf2l 4Remove the rectifierregulator red lead solenoid
the starter
5Remove the four screws retaining the rectifierregulator to the cylinder blockRemove the rectifierregulator and sealIf undamaged, the seal can be reusedInstallation f41 1Apply light coating of OMC Triple-Guard grease to the rectifierregulator sealPlace the seal in its groove in the rectifi er reg Iatorf51 2Position the rectifierregulator on the cylinder blockInstall the four rectifierregulator screws and tighten to 60-84 inIbs(7-9 Nm)f61 3Connect the rectifierregulator red lead to the starter solenoidApply OMC Black Neoprene Dip to the connection