1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 246Get this manual
18 Assembly
If removed, apply OMC Locquic Primer and OMC Screw Lock to the brush card screws before installing1Place armature in frame
1181 2Apply OMC
Pressure Grease to the brush holder
cap armature bearing
3Correctly route the brush leads and install the springs and brushesIncorrect orientation of thebrushes could damage the starter or cause reverse rotationthe brushes and springs with modified putty
'19l 4knife
5Align and place brush holder cap firmly on armature and slide putty knife out, making sure the brushes are retained properly
1201 6Install thrust washer, and align and place end cap onto