1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 211Get this manual
1201 25Position the driveshaftthrust bearingthrust washer ,and shim(s) (selected earlier) on the driveshaftin the order shown 1201 r=J Position bearingwasher ,andshim(s) exactly 26Apply light coat of OMC Gasket Sealing Compound to the gearcase area that contacts mounting flange of the bearing housingDo not coat inside bearing housing bore surface of the gearcase122 27Using OMC Driveshaft Seal Protector, PIN 318674, slide
the driveshaft bearing housing onto the driveshaft
28Push down on the shift rod to engage REVERSE gearTurn the gearcase upside down by rotating the holding fixtureBe sure any excess grease is removed from the pinion needle bearingsDegrease taper of the pinionPosition the pinion in the gearcase29Degrease the driveshaft taper and install the driveshaft30Lightly coat the threads of the pinion nut with outboard