1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 210Get this manual
13 13582
r:;:;] 17Press detent lever down to engage REVERSE (lowest)
positionDoing so will provide clearance to install the clutch shaft assembly18Note the position of the locating pin at the front of the housingThe pin must engage corresponding recess inside the nose of the gearcase'151 19Tip the rear of gearcase slightly downwardThis will help hold the housing, washer, bearing, and gear together, as well as keep the detent lever depressedInstall the clutch shaft assemblyMake sure the locating pin is properly engaged after the assembly is installed
20Lubricate two new shift rod cover O-rings with OMC Triple-Guard greaseInstall the O-rings into the shift rod cover
f171 21 Place the shift rod grommet and spacer on the shift