1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 200Get this manual
23 4Remove the set screws and remove the flange24 5Remove the shim from either the flange or forward gear1251 6Remove the thrust bearing26 7Remove the bearing housing from the forward gear1271 sRemove the thrust bearing from the forward gear9Inspect the forward gear for excessive wear or damage28 10Remove the forward gear bearing only if it needs to be replacedIf removal of the bearing is necessary, use OMC Large Puller Jaws, PIN 432129, and OMC Puller Bridge, PIN 432127, with an appropriate baseLeave the rollers in to allow for good contact with the puller jaws