1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 199Get this manual
G81 21Remove the pinion bearing only if it needs to be replacedBefore attempting removal, take out the bearing retaining ring on top side of the pinion bearing using long-handle needlenose pliers such as Snap-On No911 CP or equivalent If the pinion bearing must be replaced, use OMC Bearing Remover and Installer, PIN 391257, and assemble it as follows:
Flange Nut, PIN 326586 Plate, PIN 391260 Rod, PIN 326582
Remover, PIN 326579 Make sure all loose needles are inside bearing case before pulling bearingThe needles will provide surface for the remover tool to pull against34811