1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 194Get this manual
Installation
f11 1Coat the driveshaft splines with OMC Moly LubeDo not coat top surface of the driveshaft as lubricant here may prevent seating of the driveshaft in the crankshaftf21 2Apply OMC Adhesive sealant to the lower exhaust housing seals' inner surfacesPosition two new seals on the housing Apply OMC Triple-Guard grease to the seals' outer surfaces and position the housing on the gearcase3Rotate the propeller shaft and shift the gearcase to FORWARD4Slide the gearcase into place, making sure the driveshaft engages the crankshaft, the water tube enters the water pump, and the lower inner exhaust housing does not slip out of position