1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 175Get this manual
1sl 5up the water tube grommet with the inside taper
06Install the impeller housing cover f71 7Apply OMC Adhesive sealant to flat side of the impeller housing grommet (DInstall the grommet, flat side down
101 8Lightly coat the liner with oilWith counterclockwise
rotation, install the impeller into the liner with slot for impeller cam facing outf81 9Run thin bead of OMC Adhesive sealant in the seal groove, and install the special shaped a-ring seal Q)Installation
t3J new impeller plate gasket Install the gasket and impeller
r:;J 1Apply OMC Gasket Sealing Compound to both sides of a
t=J Slide the a-ring down the driveshaft until it contacts the
impeller plate
f21 2Apply OMC Triple-Guard grease to new impeller a-ring
19l 3Apply OMC Needle Bearing Assembly Grease to flat area of
the driveshaftInstall the drive camThe sharp edge cam is the leading edge during driveshaft rotation (6)