1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 163Get this manual
1al 7Thread the adapter from OMC Steer!ng Tube Service Kit, PIN 434523, onto the port end of the tilt tubeThread OMC Slide Hammer, PIN 432128, into the adapter until at least in(51 mm) of thread are engagedPull the tilt tube from the stern brackets8Remove the two tilt tube washers9Remove the anode"11l 10Remove the swivel bracketInspect and, if necessary, replace the tilt tube bushingsr:j2l 11Remove the trim sender unit from the port stern bracket and pull its wires through the braided tube E u