1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 161Get this manual
f7l 3Remove the water tubeInspect the water tube grommet and replace if necessaryAssembly 'sl 1Apply OMC Adhesive sealant to the bottom flange of the adapterinner exhaust housingInstall new seal
[!] 2Install the water tube3Apply OMC Gel-Seal II sealant to the adapter flange of the exhaust housingInstall the adapterinner exhaust housing onto the exhaust housingf111 4Apply OMC Nut Lock to threads of the four retaining screws and torque to 60-84 inIbs(7-9 Nm)Installation
1If removed, apply soapy water to the two lower mounts, and place the mounts in the exhaust housingOne side of mount is stamped "OUTSIDE" to indicate placementPosition the mount coversInstall the screws and torque them to 13-15 ftIbs(17-20 Nm)2Bring the exhaust housing into position with the stern bracket