1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 137Get this manual
19l 7Separate crankcase and cylinder blockIt may be necessary to tap on crankshaft with rawhide or rubber mallet to loosen19l 8Remove upper seal from crankshaftDiscard the sealA new upper seal must be installed on assembly10 9Loosen in stages and remove cylinder head retaining screws, remove the cylinder headsG1l 10Using an indelible marker, identify each connecting rod cap by cylinder numberRod No.1 is closest to the flywheel121 11Using OMC Torquing Socket PIN 331638, loosen in stages the rod cap retaining screwsDo not remove the screwsr;3l 12Using one hand to support the piston, remove the rod cap screws with your other handRemove piston