1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 102Get this manual
Ignition Coils and Power Pack Servicing Removal
1Remove the rectifierregulator cover and ignition coverDisconnect the timing sensor plugr:;-] 2Separate the 5-pin and 6-pin Packard connectors from the
L!J power pack
l3J leads and spark plug leadsRemove the screws securing the
ignition coil to the cylinder block
r:;] 3Starting with the top ignition coil, disconnect the primary
4After removing the bottom ignition coil screws, remove the ignition coil and power pack from the cylinder blockDo not attempt to remove the radio frequency shield from the power packInstallation
f31 1Position the power pack and bottom ignition coilPosition the lock washerflat washerand power pack ground lead on the bottom port ignition coil screwInstall screw finger tightr;] 2Place lock washer and flat washer on bottom starboard