1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 97Get this manual
1sl 8Lift the flywheel cover and tap the throttle shaft out of the throttle armf71 9Remove the roller arm shaft and throttle shaft retainersLift the flywheel cover from the powerhead1!l 10Remove the flywheel coverDiscard the gasket19l 11Using Snap-on A-144 fixture, or equivalent, remove the flywheel retaining screwsDiscard the screws12Using the two 3s-24x1 in screws from OMC Flywheel Service Kit, PIN 434649, secure the tool to the flywheelTwo of the holes in the flywheel are tapped for the toolTurn the center screw and draw the flywheel off the crankshaftTo avoid damaging the flywheel magnets, OMC Flywheel Service Kit, PIN 434649, should be your only method of removing and installing the flywheelInstallation