1994 Johnson Evinrude "ER" 60 LV 150, 150C, 175 Service Manual, P/N 500611, Page 63Get this manual
Disassembly
All screws addressed in this procedure are No15 Torx
ill when removing screws and releasing that pressure
The air motor cover is under spring pressureUse caution
r;] With No15 Torx screwdriver, remove the Torx screws
LJ holding
the air motor coverTo control the spring pressure, place pump on your bench with the air motor cover facing upwardHold down on cover while removing screws
Set cover, screws, O-ring, and two springs aside
t3J intermediate housing and separate these partsAs you lift the
inlet housing, the oil piston will be drawn out of the oil pump
r:;] Remove the Torx screws attaching the inlet housing to the