1994 Johnson/Evinrude "ER" 2 thru 8 outboards Service Manual, Page 232Get this manual
Manual Starter Servicing2, 2.3, 3.3 Removal 1Remove port and starboard engine coversSee Section 2
i twist and remove spark plug lead
'" 2To avoid accidental starting of engine while servicing,
III 3Remove two screws
Disassembly
retaining fuel tank
4Remove two mounting screwsLift starter from powerhead
fi11Pullout starter rope and tie slipknot to relieve spring tension while removing handleRemove two screws and washer retaining motor cover panel Untie knot in end of rope and remove handle2Pull starter rope out to limitHold pulley firmly so it will not rewind and release slipknotCarefully allow pulley to slowly rotate until it is fully unwound3Remove retaining ring f514Remove return spring and ratchet CD25390