1994 Johnson/Evinrude "ER" 2 thru 8 outboards Service Manual, Page 224Get this manual
12616Install the upper pinionabearing xusing OMC Pinion Bearing Installer, PIN 3198786V2-16 inboltand wide 3 8
washer Assemble the tools with lettered side of the bearing facing the installerDraw the upper pinion bearing into the gearcase until tool contacts gearcaseDisassemble tool components Assemble the tools with the lower pinion bearing facing installer toolDraw the lower pinion bearing into the gearcase until tool contacts gearcaser:;:;] 7If removed, position new forward bearing race in the
gearcaseUsing OMCBearing Cup Installer, PIN 326025, and mallet, drive the bearing race into its bore until it is seatedr:;;l 8The forward gear and bearing cone are serviced as an assemblyIf either is worn or damaged, replace the assembly