1994 Johnson/Evinrude "ER" 2 thru 8 outboards Service Manual, Page 214Get this manual
Assembly
Before beginning assembly procedures, refer to Cleaning and Inspection, Page 6-4
12211Oil and install new a-ring into new shift rod bushing
Assemble the Bushing Installer to the Rod (components of OMC Driveshaft Bearing Remover and Installer, PIN 393092)Place the bushing onto the Bushing and Installer with a-ring downApply OMC Adhesive sealant to the outside of the bushingUsing mallet, drive the bushing into the gearcase until seated
12312To install new lower driveshaft bearing, assemble com-