1994 Johnson/Evinrude "ER" 2 thru 8 outboards Service Manual, Page 193Get this manual
Assembly 1Install the lower engine cover to the exhaust housing
Is1 151 2Place new a-ring on the shift leverInstall the shift rod
EJ pinion with dot toward the port sideInstall the shift shaft gear with flat directly on topInsert the shift lever and engage shift shaft gearInstall and tighten the setscrew securely
L!J new a-ring on the exhaust housing coverInstall the cover and
tighten the two screws securely
r:v 3Pack the gear cavity with OMC Triple-Guard greasePlace a
Installation
rJl1Lubricate the upper mount blocks with liquid soap and place t=Jthem in position in the exhaust housing2Slide the exhaust housing into the swivel bracket
r:;l3Place the two lower side mounts into the two lower mount housingsPut the port housing in place, insert the thrust mount and position the starboard housingSecure the lower mounts with screws