1994 Johnson/Evinrude "ER" 2 thru 8 outboards Service Manual, Page 190Get this manual
Exhaust Housing Servicing3, 4 Removal and Disassembly
rv 1The entire powerhead,swivel bracket as and gearcase may exhaust housing, be removed from the an assembly by
removi ng fou screws 2Remove the powerhead as described in Section 43Remove the gearcase as described in Section 64Remove the water tube and grommet from the exhaust housing by pulling them out5Remove the cotter pin and lift out the shift rod 6Remove the setscrew to separate the shift lever and the bellcrank7Remove exhaust relief tube and grommet r:;J 8Remove the two rubber vibration dampeners
tJ ing them over bottom of the exhaust housingThe plastic pivot