1994 Johnson/Evinrude "ER" 2 thru 8 outboards Service Manual, Page 172Get this manual
Disassemblythru 8
To simplify reassembly and wiring installation, layout the various screws and clamps in the order of their proper locationr,Ql1Use punch to remove lower crankshaft sealIf necessary, replace crankshaft to driveshaft seal
I,1l f12l2
Remove leaf valve assembly and intake manifoldDiscard the gaskets
3Remove the thermostat cap and thermostat components from the cylinder head4Remove the cylinder head and gasketDiscard the gasket5With an indelible ink marker, mark the top piston dome, "No1", and the bottom piston dome, "No2"6Remove the exhaust cover screwsIf necessary, tap the exhaust cover edge with rawhide mallet'_ _====_'