1994 Johnson/Evinrude "ER" 2 thru 8 outboards Service Manual, Page 160Get this manual
f13l22Inspect wrist pin, needle bearings, and washersIf worn, replace all these components23Refer to Cleaning and Inspection at beginning of this sectionAssemblythru Deluxe
r::=J Proceed slowlyMake no forced assemblies unless pressing operation is called forAll internal components must be perfectly clean and lightly coated with Johnson or Evinrude Outboard Lubricant13
INotel Use new gaskets, seals, and O-rings during assembly11411Notel Make sure water deflector is in place1Apply coat of oil to wrist pin and wrist pin hole in piston