1994 Johnson/Evinrude "ER" 2 thru 8 outboards Service Manual, Page 129Get this manual
Ohmmeter Test
r:=J All ohmmeter tests must be made with engine NOT runN
1Disconnect 6-pin Packard connector from ignition module
Isl 2Attach 6-pin Packard test adapter from OMC Ignition Test Kit,
PIN 434017, to engine harness connectorEngine harness lead colors and test adapter lead colors do not matchWhen testing particular engine harness lead, be sure to use appropriate test adapter lead according to connector terminal locationf71 3Calibrate an ohmmeter on appropriate scaleConnect meter leads between blackyellow lead, terminal liE" and clean engine ground The meter must show high reading4Momentarily press inward on the stop button The meter must show low reading