1994 Johnson/Evinrude "ER" 2 thru 8 outboards Service Manual, Page 117Get this manual
9 Ohmmeter Test
INotel All ohmmeter tests must be performed with the engine NOT running1Insert jumper wires in ignition plate connector, terminals "A" and "0"2Calibrate ohmmeter on appropriate scaleConnect between jumpers Meter must show 900 100 ohmsr,Q13To test grounded condition, connect ohmmeter alternately between each jumper and clean engme ground Any needle movement indicates charge coil or leads are grounded Locate and repair ground, or replace charge coil4Complete all circuits disconnected during this test