1994 Johnson/Evinrude "ER" 2 thru 8 outboards Service Manual, Page 109Get this manual
Ignition Component ReplacementCD II ill twist and remove all spark plug leads'" 1To avoid accidental starting of engine while servicing,
1sl2Remove the screws retaining the ignition component that is being replaced
03Remove the wire clamp from the ignition platef114Loosen the five ignition plate screwsLift the ignition plate from the powerhead
[!J 5Remove the plate from bottom of the ignition plate6Remove the leads from the spiral wrap and from the ignition component7Loosely install the new ignition component on the ignition plate
Route leads and install clamp