1994 Johnson/Evinrude "ER" 2 thru 8 outboards Service Manual, Page 99Get this manual
71 8From OMC Universal Puller Set, PIN following components:
378103, assemble the
Body, PIN 307636
Pressing Screw, PIN 307637
Handle, PIN 307638
Screws (3), PIN 307641thru 8
Washers (3), PIN 307639thru 8
Screws (3), PIN 1153082, 2.3, 3.3 Washers (3), PIN 3076462, 2.3, 3.3
71 9Install the puller on flywheel with body flat side upSeat
the shoulder screws completelyHold puller with its handle and tighten pressing screw until flywheel releases10Remove the flywheelInstallation 1Install the flywheel key as follows:
f812, 2.3, 3.3Install the flywheel key
parallel to centerline of crankshaft
with its outer edge
19l3 thru -Install the flywheel key with its outer edge parallel