1994 Johnson/Evinrude "ER" 2 thru 8 outboards Service Manual, Page 80Get this manual
1818Remove roll pin for fuel shut-off valve, and remove shut-off
valve9Remove fuel hose(s) from carburetor10Remove screw, cam follower, and link
[DJ 11Remove two nuts, carburetor, and gasketf12l12If necessary, remove intake manifold screws, manifoldleaf plateand gaskets13Refer to Disassembly, Page 2-26Installation3, INotel Do not use sealer on intake manifold or carburetor gaskets
Replace any fuel hoses or fuel clamps if deteriorated or damaged
1Attach the leaf plate and intake manifold using new gasketsTorque screws to 60-84 inIbs(7-9 Nm)2Using new gasket, place the carburetor in position and secure with nutsConnect the fuel hose(s) to the carburetor with tie strap using OMC Tie Strap Installation Tool, PIN 3237163Install cam follower and link4Install fuel shut-off valve