1994 Johnson/Evinrude "ER" 2 thru 8 outboards Service Manual, Page 76Get this manual
[!!] 7Install valve seat1"1218float valve into valve seat, and install float hinge pin
9Install needle jet
and main jet with spring on
113l10Install slow speed adjustment screw carburetor body11Install new float chamber gasket
DRC3548
r::;;112Check for correct positioning of float hingeFloat level controls the height of fuel in the float chamber and is critical to carburetor calibration and functionTop of float hinge should be 0.090 in(2,3 mm), measured from the top of the gasket13Install float14Install float chamber on carburetor body15Using new gasket, install drain screw on float chamberInstallation