1994 Johnson/Evinrude "ER" 2 thru 8 outboards Service Manual, Page 75Get this manual
6Remove float pin and float hingeRemove float valve 07
Remove valve seat
8Remove throttle lever
[!] 9Remove carburetor body cap19l 10Compress spring EJ throttle valve
and unhook throttle cable from
11Remove jet needle and retainer from throttle valve12Refer to Carburetor Cleaning and Inspection, Page 2-16Assembly
Before proceeding, be sure that all parts are perfectly cleanBe sure that all replacement parts match original ones in size and shapeReplace all gaskets, O-rings, and sealing washers each time you assemble carburetorr,Ql 1If clip is removed from jet needlerefer to Carburetor Adjustment to determine correct slot2Assemble the jet needle in throttle valver,Ql 3Place retainer in throttle valve, over the clipAlign retainer slot with the slot in the throttle valve