1994 Johnson/Evinrude Accessories Service Manual, Page 63Get this manual
Throttle Cable [] 4Place throttle cable anchor into slot stamped "OMC" in the FRONT of the control
INote The bottom slots are for SAE cables[] 5Install throttle cable trunnion into anchor
m fA 6.hole with hole HANDLEInstall of throttlefrom horn sidePull cable to SIDE lever, aligning in levercable pin cable end
Install cotter pin and secure by spreading ends[] 7Position anchor retainer on cable trunnion and anchor, and install screw and locknutTorque to 25-35 inIbs(2,8-4,0 Nm)