1994 Johnson/Evinrude Accessories Service Manual, Page 60Get this manual
[] 10Lubricate the neutral warm-up rod and shift lever supportInstall the two springs and warm-up rod in the support
The warm-up rod springs can fly out of position and cause an injury or become lostHold warm-up rod down and hold springs in place until they are held in place by shaft support in Step 1211Lubricate inside surface of the shaft support
12Place the shaft support on the shaft and press firmly together
12113Install the washer and retaining ring on the shaft14Lubricate the spacer and roller Install the spacer over the shaft and the roller on the pin