1994 Johnson/Evinrude Accessories Service Manual, Page 59Get this manual
[] 5Place the cable mounting plate on the detent plate[] 6Lubricate the back of the shift leverLightly lubricate the cam, rollers, and roller slotsInstall rollers in slots and shift lever over cam]] 7Lubricate the two slots in the camPush the pin into the shaft and place ring's upper tab in slot above pinPush pin at bottom of ring into cam slot and spring will push pin on ring into cam rn 8install theinfriction adjustment screwLightly spring, lubricate Place in the it, and it the shift lever supportlubricate in and