1994 Johnson/Evinrude Accessories Service Manual, Page 55Get this manual
Prewired Binnacle Mount Remote Control Disassembly
1Disconnect battery cables at the battery before servicing electrical systems, or risk injury from: burns or fire caused by shorted positive battery cable contact with moving parts if engine is accidentally cranked or started2Remove the remote control from the boat with the cables still attached29692
Remove the nuts that retain the ignition switch and emergency stop switchRemove the cover4Remove the throttle and shift cables from the control5Put control in NEUTRALRemove the screw cover from the handle and remove the screw and washer6Pry the handle loose from the splines on the driveshaft29693