1994 Johnson/Evinrude Accessories Service Manual, Page 51Get this manual
COA5318
Assem bly
Failure to follow assembly instructions closely could result in remote control malfunction, causing sudden and unexpected loss of throttle or shift control1Position shift arm washer and shift gear and arm assembly in port housing
Use care and wear safety glasses during the next stepThe detent spring will be highly compressed and can fly out
rn armAssemble detent spring position Insert and compressgear 2shoe and rollerMove shift the and assembly to NEUTRAL
detent springshoeand roller into cavity, seating the detent roller in the neutral detent notch3Install shaft bushing from inside of housingW
4Insert remote control shaft through the bushingInstall retain ing ring in groove closest to bushing 5Install drive gear return spring with large diameter of spring on bushingPlace washer in shift drive gear