1994 Johnson/Evinrude Accessories Service Manual, Page 39Get this manual
10Depress and hold the neutral warm-up rod and pull out the shift cam drive pin rn []] rn
9Lift off driveshaft and detent spacer as an assemblyLift the cable mounting plate off the shift lever support
11Separate the driveshaft from the detent spacer and remove the detent ball The detent ball is retained by the driveshaft and spacer and it will fall out when they are separated12Remove the neutral warm-up roddriveshaft balland spring from the driveshaft assembly13Remove detent shoe CD, inner spring Q), outer springand screw and nut cpDo not mix this left-hand-thread screw and nut with other fasteners10