1993 Johnson Evinrude "ET" Electric Outboards Service Manual, P/N 508280, Page 141Get this manual
Pedal and Base ServiceAll Models 1To replace either the pedal or the base, remove all of the attached components as described individually in this section2Remove the steering cable as described in Steering Cable Replacement, Page 3-17 or 3-20
rn 3Using pedal to the pin and press, remove the hinge pin pressing baseattaching the4Install bushings in foot control base[]] 5Apply OMC Tripe-Guardgrease to the bushings and hinge pin
6Install the hinge pin using suitable pressing pin and press