1993 Johnson Evinrude "ET" Electric Outboards Service Manual, P/N 508280, Page 136Get this manual
ONOFF Switch ServiceAll Models
Removal 1Remove screw retaining switch and bracket2Unsolder and remove two red wires from switch
[]] 3Remove rubber boot from switch
rn 4Remove nut retaining the switch to the bracketSave fiber washer and O-ringInstallation []] 5Reinstall fiber washer and O-ring on the new switch6Place bracket on switch
rn 7Install nut and tighten securely[]] 8Install rubber boot
rn 9diagramred the end of this sectionwires as shown on Solder wires to the switchRoute at iring