1993 Johnson Evinrude "ET" Electric Outboards Service Manual, P/N 508280, Page 122Get this manual
Installation
1Place new seal over motor wiresApply RTV sealant to top of seal
20 2Lubricate motor wires with OMC All-Purpose Marine CleanerPush wires through motor tube3Apply OMC Ultra Lock to the motor tube threadsTighten adapter onto motor to about 60 inIbs(7 Nm)4Refer to Motor OffsetAll Models, Page 4-10, before tightening motor on tube 5Install steering housing as described in Section 3