1993 Johnson Evinrude "ET" Electric Outboards Service Manual, P/N 508280, Page 116Get this manual

1993 Johnson Evinrude "ET" Electric Outboards Service Manual, P/N 508280, Page 116

16 Installation

1Place new O-ring in motor grooveSlide heat shrink tubes over motor wires2Attach the motor wires to the motor tube wiresCrimp and solder the splices

INote Use only rosin core solderDo not use an acid core solder Connect motor red wire to tube red wire Connect motor green wire to tube black wire0194

Back to 1993 Johnson Evinrude "ET" Electric Outboards Service Manual, P/N 508280