1993 Johnson Evinrude "ET" Electric Outboards Service Manual, P/N 508280, Page 99Get this manual
Installation 1Clean the threaded area of the motor tube using OMC Cleaning Solvent 2Install motor tube seal into adapterApply RTV adhesive sealant to top of seal
3Spray OMC All-Purpose Marine Cleaner on the motor tube wires to provide lubrication4Insert the wires into the motor tube5Temporarily attach motor to adapter
6Apply OMC Ultra Lock to the threads of the motor tube
7Tighten adapter on motor tube[]] 8Align adapter set screw hole with existing dent in motor tube to set approximate motor alignment9Set motor offset using the procedure on Page 4-10