1993 Johnson Evinrude "ET" Electric Outboards Service Manual, P/N 508280, Page 87Get this manual
15Turn motor straight ahead, and place cover on steering housing with direction indicator pointing straight ahead16Tighten cover screws to 7-10 inIbs(0,8-1,1 Nm)
17Install steering cable clamp and battery cable clamp in pedal base
18Thread pivot block onto the steering cable until it is centered on the cable threadsTemporarily insert the pivot block pin
Steering Cable AdjustmentHBF2
1Push toe end of pedal down all the wayNote how far the motor steers to the right (how much more than 180)Push heel end of pedal downNote how far motor turns to the left