1993 Johnson Evinrude "ET" Electric Outboards Service Manual, P/N 508280, Page 82Get this manual

1993 Johnson Evinrude "ET" Electric Outboards Service Manual, P/N 508280, Page 82

1 Steering Cable ReplacementExcept HBF2
Removal

1Remove the four screws retaining the steering housing coverRemove the cover2Remove the steering cable set screw
3Push down on heel of foot pedal to extend steering cable4Lift the steering gear off of the pivot post
5Unthread the steering gear and set it aside6Cut the sleeve to separate the steering cable from the electrical cable

When cutting the sleeve, be careful not to damage the electrical wires7Remove the E-ring retaining the cable to the foot pedal

Back to 1993 Johnson Evinrude "ET" Electric Outboards Service Manual, P/N 508280