1993 Johnson Evinrude "ET" Electric Outboards Service Manual, P/N 508280, Page 39Get this manual
7Turn switch shaft counterclockwise to select speeds thru (1 through on 12 volt models):
the switch at speed 1, the meter must show continuity between WHITE lead and terminal "3"
The meter must show no continuity between HITE lead and terminals "1", "2", "4"8Turn the switch to speed 2:
W The meter must show continuity between HITE lead
and terminal "4" The meter must show no continuity between WHITE lead and terminals "1", "2", "3"9Turn the switch to speed 3:
The meter must show continuity between WHITE lead and terminal "2"
The meter must show no continuity between WHITE lead and terminals "1", "3", "4"1012 volt models, turn the switch to speed 4: []] The meter must show continuity between WHITE lead and terminal "1" The meter must show no continuity between WHITE lead and terminals "2""3", "4" 11Turn the switch clockwise from the OFF position to JOG position: